Diamond-coated milling burs for Yelan machines, designed for wet milling glass ceramics including lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo. Three configurations cover roughing and finishing of single crowns, inlays, onlays, veneers, and anterior bridges in chairside or lab workflows.
| Compatible Machines | Yelan |
|---|---|
| Interface Type | φ4mm Smooth Shank |
| Material Category | Glass Ceramic |
| Configurations | 3 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| G-4-0.6 | φ0.6×TL12×φ4×L42 | 0.6 | 12 | 4 | 42 | 1 |
| G-4-1.0 | φ1.0×TL6×φ4×L42 | 1 | 6 | 4 | 42 | 1 |
| G-4-2.0 | φ2.0×TL17×φ4×L42 | 2 | 17 | 4 | 42 | 1 |
The φ2.0mm head diameter is suited for roughing and bulk material removal. The φ1.0mm and φ0.6mm head diameters are suited for intermediate and finishing stages where finer detail is required.
Not for milling metals or for dry milling; only for wet milling of the specified glass ceramic materials on Yelan machines with φ4mm smooth shank collet-clamped tools.
All three configurations use a φ4mm smooth shank with collet clamping for Yelan machines.
They are for glass ceramics: lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo.
The burs are designed for Yelan machines that accept φ4mm smooth shank collet-clamped tools.
Use the larger φ2.0mm for roughing and bulk material removal, the φ1.0mm for intermediate work, and the φ0.6mm for fine detail and finishing.
No. These burs are specified for wet milling only.
Replace when you see visible loss of diamond coating on the cutting surfaces, reduced cutting efficiency, or a decline in restoration surface finish.
No, these are aftermarket burs manufactured by SINCEN Dental, designed to fit Yelan machines with φ4mm smooth shank collet clamping.