SINCEN Dental diamond-coated milling burs with a φ4mm smooth shank for XTCERA-compatible wet milling of glass ceramics. Designed for lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo in chairside or lab workflows. Three head diameters support single crowns, inlays, onlays, veneers, and anterior bridges on XTCERA X-Mill 300 and compatible 400, 500, 600, and D5 machines.
| Compatible Machines | 400, 500, 600, D5, XTCERA X-Mill 300, XTCERA X‑Mill 300 |
|---|---|
| Interface Type | φ4mm Smooth Shank |
| Material Category | Glass Ceramic |
| Configurations | 3 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| G-4-0.6 | φ0.6×TL10×φ4×L45 | 0.6 | 10 | 4 | 45 | 1 |
| G-4-1.0 | φ1.0×TL10×φ4×L45 | 1 | 10 | 4 | 45 | 1 |
| G-4-2.5 | φ2.5×TL16×φ4×L45 | 2.5 | 16 | 4 | 45 | 1 |
The φ2.5 head diameter is suitable for roughing and bulk material removal; the φ1.0 head diameter is suitable for intermediate milling; the φ0.6 head diameter is suitable for finishing and fine detail.
These burs are not for milling metals, not for dry milling, and not for machines requiring threaded shanks such as Sirona CEREC MC, MC X, MC XL, or CEREC 3.
These burs use a φ4mm smooth shank that is collet-clamped. They are not threaded and are not compatible with Sirona CEREC MC, MC X, MC XL (M3.5 threaded shank) or CEREC 3 (M1.8 threaded shank).
They are compatible with XTCERA X-Mill 300 and machines designated as 400, 500, 600, and D5 that accept a φ4mm smooth shank collet-clamped bur.
These burs are designed for wet milling of glass ceramics: lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo.
The φ2.5 head diameter is suited for roughing and larger material removal. The φ1.0 head diameter is suited for intermediate work. The φ0.6 head diameter is suited for finishing and fine detail.
Replace the bur when you observe visible loss of diamond coating, chipping on the cutting portion, increased milling time, rough surface finish on restorations, or audible vibration during milling.
These are SINCEN Dental aftermarket burs manufactured to fit XTCERA-compatible machines with a φ4mm smooth shank collet-clamped interface. They are not sold as XTCERA OEM burs. Lab-friendly wholesale pricing is available.