SINCEN Dental offers three diamond-coated milling burs with a 3mm smooth shank for XTCERA X-Mill D-ONE systems. Designed for wet milling of lithium disilicate, feldspathic ceramic, Vita Suprinity, and Celtra Duo, these burs support chairside or lab production of crowns, inlays, onlays, veneers, and anterior bridges.
| Compatible Machines | XTCERA X-Mill D-ONE, XTCERA X‑Mill D-ONE |
|---|---|
| Interface Type | φ3mm Smooth Shank |
| Material Category | Glass Ceramic |
| Configurations | 3 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| G-3-0.6 | φ0.6×TL12×φ3×L45 | 0.6 | 12 | 3 | 45 | 1 |
| G-3-1.0 | φ1.0×TL10×φ3×L45 | 1 | 10 | 3 | 45 | 1 |
| G-3-2.5 | φ2.5×TL16×φ3×L45 | 2.5 | 16 | 3 | 45 | 1 |
The φ2.5mm bur is suited for roughing and bulk material removal in the initial milling stage. The φ1.0mm bur handles semi-finishing of main anatomy, while the φ0.6mm bur is used for fine finishing, margin definition, and intricate details.
These burs are not for metal, zirconia, or dry milling applications.
All three configurations use a φ3mm smooth shank (collet-clamped), not a threaded interface. This matches the XTCERA X-Mill D-ONE tool holder.
No. Sirona CEREC MC, MC X, and MC XL use a proprietary M3.5 threaded shank, not a φ3mm smooth shank. CEREC 3 uses M1.8. These burs are only for XTCERA X-Mill D-ONE systems.
The φ2.5mm bur is typically used for bulk material removal in the roughing stage. The φ1.0mm bur suits semi-finishing of occlusal and axial surfaces. The φ0.6mm bur is intended for fine detail, tight fissures, and margin areas.
Watch for visible loss of diamond coating, chipping or rounding of the cutting edges, increased milling time, or surface roughness on the restoration. These are signs the bur is worn and should be replaced.
No. These burs are specified for glass ceramics only: lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo. They are not intended for zirconia, metal, or composite materials.
No. These burs are designed for wet milling. Dry milling of glass ceramics with these tools can cause overheating and premature coating wear.
SINCEN Dental is a bur manufacturer, not the machine OEM. These are aftermarket burs engineered to fit the XTCERA X-Mill D-ONE tool interface and material requirements.