DLC-coated milling burs for Shinva 3mm shank dry milling machines. Designed for pre-sintered and multi-layer zirconia, these burs support single crowns, bridges, full-arch frameworks, and implant abutments. Available in three head diameters—φ0.6mm, φ1mm, and φ2mm—with smooth φ3mm collet-clamped shanks.
| Compatible Machines | Shinva (3mm Shank), Shinva milling machine |
|---|---|
| Interface Type | φ3mm Smooth Shank |
| Material Category | Zirconia |
| Configurations | 3 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| φ0.6mm | φ0.6×TL10×φ3×L47 | 0.6 | 10 | 3 | 47 | 1 |
| φ1mm | φ1×TL16.5×φ3×L47 | 1 | 16.5 | 3 | 47 | 1 |
| φ2mm | φ2×TL16×φ3×L47 | 2 | 16 | 3 | 47 | 1 |
The φ2mm is suited to roughing and bulk material removal; the φ1mm to intermediate shaping; the φ0.6mm to finishing and fine detail.
These burs are not for metals, wax, PMMA, sintered zirconia, or wet milling, and they do not fit Sirona CEREC MC/MC X/MC XL machines (M3.5 threaded shank) or CEREC 3 (M1.8).
They use a smooth φ3mm shank, collet-clamped. They are not threaded and do not fit Sirona CEREC MC/MC X/MC XL machines, which use a proprietary M3.5 threaded shank.
Shinva milling machines with a 3mm shank collet. Always confirm your machine's shank specification before ordering.
Pre-sintered zirconia and multi-layer zirconia. They are not specified for metals, wax, PMMA, or sintered zirconia.
The φ2mm is suited to bulk material removal and roughing. The φ1mm handles intermediate shaping. The φ0.6mm is for fine detail and finishing passes.
Watch for signs such as increased cutting resistance, chipping on restoration margins, visible coating wear on the cutting edges, or dimensional inaccuracy in milled restorations.
These are aftermarket burs manufactured by SINCEN Dental, designed to fit Shinva 3mm shank machines. They are not OEM Shinva parts.
They are specified for dry milling. Wet milling is outside the stated application.