SINCEN Imes-icore 350i compatible glass ceramic milling burs are diamond-coated rotary instruments for wet milling of lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo. These burs are designed for chairside or lab production of single crowns, inlays, onlays, veneers, and anterior bridges on the Imes-icore 350i. The series includes three configurations with φ6mm smooth collet-clamped shanks.
| Compatible Machines | Imes-icore 350i |
|---|---|
| Interface Type | φ6mm Smooth Shank |
| Material Category | Glass Ceramic |
| Configurations | 3 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| G-6-0.6 | φ0.6×TL10×φ6×L40 | 0.6 | 10 | 6 | 40 | 1 |
| G-6-1.0 | φ1.0×TL10×φ6×L40 | 1 | 10 | 6 | 40 | 1 |
| G-6-2.5 | φ2.5×TL15×φ6×L40 | 2.5 | 15 | 6 | 40 | 1 |
The φ0.6 mm and φ1.0 mm head diameters suit fine finishing, margin definition, and detailed occlusal anatomy. The φ2.5 mm head diameter suits bulk material removal and roughing passes.
These burs are not for milling metals, composites, or dry milling of glass ceramics, and are not compatible with machines that require threaded shanks.
All three variants use a φ6mm smooth shank for collet clamping in the Imes-icore 350i. They do not use a threaded shank.
No. CEREC MC, MC X, and MC XL machines require a proprietary M3.5 threaded shank, not a φ6mm smooth shank. These burs are only for the Imes-icore 350i.
Lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo. They are intended for wet milling of glass ceramic restorations.
Use the smaller diameters for fine occlusal anatomy, margin definition, and interdental areas. The larger φ2.5 mm head removes material faster in broader areas. Selection depends on the restoration geometry and CAM strategy.
Look for visible loss of diamond coating, chipping or rounding of the cutting edges, increased milling time, rougher surface finish on the workpiece, or higher spindle load. Replace when these signs appear.
No. These burs are for wet milling only. Dry milling is not recommended for these glass ceramic materials with this bur series.
These are SINCEN aftermarket burs manufactured to fit the Imes-icore 350i collet system. They are not OEM Imes-icore products.