Diamond-coated milling burs for Imes-icore 250i and compatible wet milling machines. Designed for chairside or lab milling of lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo. Three head diameters cover roughing and finishing for single crowns, inlays, onlays, veneers, and anterior bridges. Each bur has a φ3 mm smooth shank for collet clamping.
| Compatible Machines | 140i, 150i, 245i, Imes-icore 250i |
|---|---|
| Interface Type | φ3mm Smooth Shank |
| Material Category | Glass Ceramic |
| Configurations | 3 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| G-3-0.6 | φ0.6×TL12×φ3×L45 | 0.6 | 12 | 3 | 45 | 1 |
| G-3-1.0 | φ1.0×TL10×φ3×L45 | 1 | 10 | 3 | 45 | 1 |
| G-3-2.5 | φ2.5×TL16×φ3×L45 | 2.5 | 16 | 3 | 45 | 1 |
The φ2.5 mm head is suited for roughing and bulk material removal; the φ1.0 mm head for intermediate shaping; the φ0.6 mm head for finishing fine details, margins, and tight internal contours.
These burs are not for metal, zirconia, composites, or dry milling, and they do not fit Sirona CEREC machines with threaded shanks.
All three variants use a φ3 mm smooth shank that is collet-clamped. They are not threaded and do not fit Sirona CEREC MC/MC X/MC XL machines, which use a proprietary M3.5 threaded shank.
They fit the Imes-icore 250i and compatible Imes-icore 140i, 150i, and 245i milling machines that accept φ3 mm smooth-shank collet-clamped burs.
They are for wet milling of glass ceramics: lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo.
Use the larger φ2.5 mm bur for bulk material removal, the φ1.0 mm bur for intermediate shaping, and the φ0.6 mm bur for fine details and tight internal contours.
Watch for visible loss of diamond coating, chipping or rounding of the cutting edges, increased milling time, rougher surface finish, or higher spindle load. Replace when these signs appear rather than after a fixed number of units.
No, they are SINCEN aftermarket burs manufactured to fit Imes-icore 250i and compatible machines with φ3 mm smooth-shank collet clamping. Lab-friendly wholesale pricing is available.
No. They are designed for wet milling of glass ceramics. Dry milling can cause overheating and premature wear of the diamond coating.