DLC-coated zirconia milling burs designed for dry milling of pre-sintered and multi-layer zirconia on BESMED and Ideal milling machines. Four head diameters—φ0.6mm, φ1.0mm, φ1.5mm, and φ2.0mm—share a φ4mm smooth shank for collet clamping. Suitable for single crowns, bridges, full-arch frameworks, and implant abutments.
| Compatible Machines | BESMED, BESMED milling machine, Ideal |
|---|---|
| Interface Type | φ4mm Smooth Shank |
| Material Category | Zirconia |
| Configurations | 4 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| φ0.6mm | φ0.6×TL10×φ4×L50 | 0.6 | 10 | 4 | 50 | 1 |
| φ1.5mm | φ1.5×TL20×φ4×L50 | 1.5 | 20 | 4 | 50 | 1 |
| φ1mm | φ1×TL16×φ4×L50 | 1 | 16 | 4 | 50 | 1 |
| φ2mm | φ2×TL16×φ4×L50 | 2 | 16 | 4 | 50 | 1 |
The φ2.0mm and φ1.5mm heads are suited for roughing and bulk material removal in large frameworks and bridges. The φ1.0mm and φ0.6mm heads are suited for finishing, fine margin definition, and detailed occlusal anatomy.
These burs are not for wet milling, metals, glass ceramics, fully sintered zirconia, or any machine requiring a threaded shank.
All four configurations use a φ4mm smooth shank (collet-clamped). They do not have threaded shanks and are not compatible with machines requiring M3.5 or M1.8 proprietary threading.
No. Sirona CEREC MC, MC X, and MC XL use a proprietary M3.5 threaded shank, and CEREC 3 uses M1.8. These SINCEN burs have a φ4mm smooth shank for BESMED and Ideal machines only.
Use the φ2.0mm or φ1.5mm for bulk material removal and larger framework areas. The φ1.0mm handles intermediate detail and margin refinement. The φ0.6mm is for fine occlusal anatomy, tight embrasures, and delicate margin areas.
These burs are specified for dry milling of pre-sintered and multi-layer zirconia only. They are not intended for wet milling, metals, glass ceramics, or fully sintered zirconia.
Watch for visible edge rounding, increased cutting resistance, surface chipping on milled restorations, or loss of fine detail in margins and occlusal anatomy. Replace when these signs appear—do not rely on a fixed unit count.
These are aftermarket burs manufactured by SINCEN Dental, designed to fit BESMED and Ideal milling machines with φ4mm collet clamping. They are not produced by the machine manufacturer.
SINCEN offers lab-friendly wholesale pricing for these burs. Contact your SINCEN distributor for current pricing based on quantity and configuration.