Diamond-coated milling burs with a 6mm smooth shank for Dentium wet milling machines. Designed for chairside or lab milling of lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo. Available in three head diameters for single crowns, inlays, onlays, veneers, and anterior bridges.
| Compatible Machines | Dentium |
|---|---|
| Interface Type | φ6mm Smooth Shank |
| Material Category | Glass Ceramic |
| Configurations | 3 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| G-6-0.6 | φ0.6×TL5×φ6×L50 | 0.6 | 5 | 6 | 50 | 1 |
| G-6-1.0 | φ1.0×TL8×φ6×L50 | 1 | 8 | 6 | 50 | 1 |
| G-6-2.0 | φ2.0×TL12×φ6×L50 | 2 | 12 | 6 | 50 | 1 |
The 0.6mm head diameter suits fine finishing and detailed anatomy; the 1.0mm head diameter balances roughing and finishing; the 2.0mm head diameter suits initial roughing and bulk material removal.
These burs are not for milling metals, zirconia, or other non-glass-ceramic materials, and are not intended for dry milling.
These burs use a 6mm smooth shank that is collet-clamped. They are not compatible with threaded shank systems such as the M3.5 or M1.8 shanks used by some other milling machines.
They are designed for Dentium milling machines that accept a 6mm smooth shank with collet clamping.
They are intended for glass ceramic materials: lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo.
The 0.6mm head is for fine detail and tight internal features, the 1.0mm head balances detail and material removal, and the 2.0mm head is for larger material removal and broad surfaces.
Look for visible loss of diamond coating, chipping or rounding of the cutting edges, increased milling time, or rougher surface finish on the restoration. These are signs the bur is wearing and should be replaced.
No, these burs are for wet milling only. Using them dry can damage the diamond coating and the workpiece.
These are aftermarket burs manufactured by SINCEN Dental with a 6mm smooth shank for Dentium machine compatibility.