SINCEN Dental offers two diamond-coated milling burs with a 3mm smooth shank for Dentium wet milling machines. These burs are designed for machining lithium disilicate, feldspathic ceramic, Vita Suprinity, and Celtra Duo. They support chairside or lab production of single crowns, inlays, onlays, veneers, and anterior bridges.
| Compatible Machines | Dentium |
|---|---|
| Interface Type | φ3mm Smooth Shank |
| Material Category | Glass Ceramic |
| Configurations | 2 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| G-3-1.0 | φ1.0×TL10×φ3×L45 | 1 | 10 | 3 | 45 | 1 |
| G-3-2.0 | φ2.0×TL13×φ3×L45 | 2 | 13 | 3 | 45 | 1 |
The 2.0mm head diameter is suitable for roughing and bulk material removal. The 1.0mm head diameter is suitable for finishing and fine detail work.
These burs are not for metal, not for dry milling, and not for machines that require threaded shanks such as Sirona CEREC MC/MC X/MC XL.
These burs have a 3mm smooth shank that is clamped by a collet in Dentium milling machines. They do not use a threaded shank.
No. Sirona CEREC MC, MC X, and MC XL use a proprietary M3.5 threaded shank, not a 3mm smooth shank. These burs are for Dentium machines only.
The 2.0mm head is generally used for bulk material removal and roughing. The 1.0mm head is suited for fine detail, occlusal anatomy, and finishing passes.
They are designed for lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo. They are not intended for metals or resins.
Look for visible loss of diamond coating, chipping or rounding of the cutting edges, increased milling time, rough surface finish on restorations, or unusual vibration during milling.
No, these are aftermarket burs manufactured by SINCEN Dental with a 3mm smooth shank to fit Dentium machines.
These burs are specified for wet milling. Dry milling of glass ceramics is not recommended.