SINCEN Dental Cradle 3mm shank glass ceramic milling burs feature a diamond coating and are designed for wet milling lithium disilicate (IPS e.max), feldspathic ceramic, Vita Suprinity, and Celtra Duo. These burs support chairside or lab milling of single crowns, inlays, onlays, veneers, and anterior bridges on Cradle C41 and UPCERA DGA+ machines.
| Compatible Machines | Cradle C41 UPCERA DGA+, Cradle C41 UPCERA DGA+ |
|---|---|
| Interface Type | φ3mm Smooth Shank |
| Material Category | Glass Ceramic |
| Configurations | 3 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| G-3-0.6 | φ0.6×TL8×φ3×L38 | 0.6 | 8 | 3 | 38 | 1 |
| G-3-1.0 | φ1.0×TL10×φ3×L38 | 1 | 10 | 3 | 38 | 1 |
| G-3-2.5 | φ2.5×TL16×φ3×L38 | 2.5 | 16 | 3 | 38 | 1 |
The φ2.5mm head diameter suits roughing and bulk material removal. The φ1.0mm and φ0.6mm head diameters suit semi-finishing and fine finishing of detailed areas.
These burs are not for milling metals or for dry milling.
These burs use a φ3mm smooth shank that is collet-clamped. They are not compatible with Sirona CEREC MC, MC X, or MC XL machines, which require a proprietary M3.5 threaded shank.
The burs have a diamond coating on the cutting surface.
They are compatible with Cradle C41 and UPCERA DGA+ milling machines.
The φ2.5mm head is suited for roughing and bulk material removal, the φ1.0mm head for semi-finishing, and the φ0.6mm head for fine finishing and detailed areas.
Replace the bur when you notice increased chipping on the restoration margin, longer milling times, or visible loss of diamond coating on the cutting surface.
These are aftermarket burs manufactured by SINCEN Dental, designed to fit Cradle C41 and UPCERA DGA+ machines.
No, these burs are intended for wet milling only.