SINCEN Dental DLC-coated zirconia milling burs are designed for dry milling of pre-sintered and multi-layer zirconia on Amann Girrbach milling machines. Available in φ0.6 mm, φ1 mm, and φ2.5 mm head diameters, all with a φ3 mm smooth collet-clamped shank. These burs support milling of single crowns, bridges, full-arch frameworks, and implant abutments.
| Compatible Machines | Amann Girrbach, Amann Girrbach milling machine |
|---|---|
| Interface Type | φ3mm Smooth Shank |
| Material Category | Zirconia |
| Configurations | 3 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| φ0.6mm | φ0.6×TL10×φ3×L47 | 0.6 | 10 | 3 | 47 | 1 |
| φ1mm | φ1×TL16×φ3×L47 | 1 | 16 | 3 | 47 | 1 |
| φ2.5mm | φ2.5×TL16×φ3×L47 | 2.5 | 16 | 3 | 47 | 1 |
The φ2.5 mm bur suits roughing and bulk material removal. The φ1 mm bur suits intermediate shaping, and the φ0.6 mm bur suits fine finishing and detailed areas.
These burs are not for milling metals, glass ceramics, or fully sintered zirconia, and are not intended for wet milling.
All three configurations use a φ3 mm smooth shank that is collet-clamped. This is not a threaded shank.
They are designed for Amann Girrbach milling machines that accept a φ3 mm smooth collet-clamped shank.
The diamond-like carbon coating reduces friction on the cutting edge during dry milling of zirconia.
Use the larger φ2.5 mm bur for bulk material removal, the φ1 mm bur for intermediate shaping, and the φ0.6 mm bur for fine details and tight internal geometries.
They are intended for pre-sintered zirconia and multi-layer zirconia in dry milling applications.
Look for visible wear on the cutting edges, increased milling noise or vibration, rougher surface finish on restorations, or chipping of the zirconia during milling.
No, these are aftermarket burs manufactured by SINCEN Dental to be compatible with Amann Girrbach milling machines that use a φ3 mm smooth collet-clamped shank.