SINCEN Dental DLC-coated zirconia milling burs are designed for dry milling of pre-sintered and multi-layer zirconia on Aidite AMD500 milling machines. The set includes four φ4mm smooth shank (collet-clamped) configurations with head diameters of 0.6mm, 1.0mm, 1.5mm, and 2.0mm, covering roughing to fine finishing for crowns, bridges, full-arch frameworks, and implant abutments.
| Compatible Machines | AMD500, Aidite milling machine |
|---|---|
| Interface Type | φ4mm Smooth Shank |
| Material Category | Zirconia |
| Configurations | 4 |
| Order No | Specification | Head Ø | Neck | Shank | Length | Inquiry |
|---|---|---|---|---|---|---|
| φ0.6mm | φ0.6×TL10×φ4×L50 | 0.6 | 10 | 4 | 50 | 1 |
| φ1.5mm | φ1.5×TL20×φ4×L50 | 1.5 | 20 | 4 | 50 | 1 |
| φ1mm | φ1×TL16×φ4×L50 | 1 | 16 | 4 | 50 | 1 |
| φ2mm | φ2×TL16×φ4×L50 | 2 | 16 | 4 | 50 | 1 |
The 2.0mm and 1.5mm diameters are suited for roughing and bulk material removal; the 1.0mm diameter suits intermediate contouring; the 0.6mm diameter suits fine finishing and detail work.
These burs are not for milling metals, glass ceramics, or wet milling applications.
All four configurations use a φ4mm smooth shank with collet clamping, compatible with Aidite AMD500 milling machines.
No. Sirona CEREC MC, MC X, and MC XL use a proprietary M3.5 threaded shank, not a φ4mm smooth shank. These burs are designed for Aidite AMD500 machines.
These burs are intended for dry milling of pre-sintered zirconia and multi-layer zirconia blocks.
The 2.0mm and 1.5mm diameters are suited for bulk material removal and roughing. The 1.0mm diameter handles intermediate contouring, and the 0.6mm diameter is used for fine detail and finishing.
Replace the bur when you observe increased milling vibration, chipping or rough surface finish on zirconia, visible coating wear on the cutting edges, or longer milling times for the same geometry.
These are aftermarket burs manufactured by SINCEN Dental, designed to be compatible with Aidite AMD500 milling machines. They are not Aidite OEM burs.
No. These burs are specified for dry milling only. Use with coolant is not covered by the product design.